pulsecount Pulse Count Example

This example starts a finite pulse train on a pulsecount device and waits for completion when the device is opened in blocking mode.

Required configuration:

• CONFIG_PULSECOUNT – Enables pulsecount support.

• CONFIG_NSH_BUILTIN_APPS – Builds the example as an NSH built-in.

Specific configuration options:

• CONFIG_EXAMPLES_PULSECOUNT_DEVPATH – The default pulsecount device. Default: /dev/pulsecount0.

• CONFIG_EXAMPLES_PULSECOUNT_HIGH_NS – The pulse high time. Default: 5000000 ns.

• CONFIG_EXAMPLES_PULSECOUNT_LOW_NS – The pulse low time. Default: 5000000 ns.

• CONFIG_EXAMPLES_PULSECOUNT_COUNT – The finite pulse count.