z20x

Microcontroller. This directory holds the port of NuttX to the z80x board based on an ez80Acclaim! eZ80F091 microcontroller.

Configurations

hello.zdsproj: is a simple ZDS-II project that will allow you to use the ZDS-II debugger.
hello.zfpproj: is a simple project that will allow you to use the Smart Flash Programming. NOTE: As of this writing this project does not work, probably due to RAM configuration in the project. Use ZDS-II instead as is described in the upper README.txt file
hello_ram.ztgt is the target file that accompanies the project files.: This one is identical to boards/scripts/z20x_ram.ztgt.
hello_flash.ztgt: is the target file that accompanies the project files. This one is identical to boards/scripts/z20x_flash.ztgt.

nsh.zdsproj: is a simple ZDS-II project that will allow you to use the ZDS-II debugger.
nsh.zfpproj: is a simple project that will allow you to use the Smart Flash Programming. NOTE: As of this writing this project does not work, probably due to RAM configuration in the project. Use ZDS-II instead as is described in the upper README.txt file
nsh_ram.ztgt: is the target file that accompanies the project files. This one is identical to boards/scripts/z20x_ram.ztgt.
nsh_flash.ztgt: is the target file that accompanies the project files. This one is identical to boards/scripts/z20x_flash.ztgt.

sdboot.zdsproj: is a simple ZDS-II project that will allow you to use the ZDS-II debugger.
sdboot.zfpproj: is a simple project that will allow you to use the Smart Flash Programming. NOTE: As of this writing this project does not work, probably due to RAM configuration in the project. Use ZDS-II instead as is described in the upper README.txt file
sdboot_flash.ztgt: is the target file that accompanies the project files. This one is identical to boards/scripts/z20x_ram.ztgt.
sdboot_ram.ztgt: is the target file that accompanies the project files. This one is identical to boards/scripts/z20x_flash.ztgt.

w25boot.zdsproj: is a simple ZDS-II project that will allow you to use the ZDS-II debugger.
w25boot.zfpproj: is a simple project that will allow you to use the Smart Flash Programming. NOTE: As of this writing this project does not work, probably due to RAM configuration in the project. Use ZDS-II instead as is described in the upper README.txt file
w25boot_flash.ztgt: is the target file that accompanies the project files. This one is identical to boards/scripts/z20x_ram.ztgt.
w25boot_ram.ztgt: is the target file that accompanies the project files. This one is identical to boards/scripts/z20x_flash.ztgt.