smart SMART File System

This is a test of the SMART file system that derives from testing/nxffs.

• CONFIG_TESTING_SMART – Enable the SMART file system example.

• CONFIG_TESTING_SMART_ARCHINIT – The default is to use the RAM MTD device at drivers/mtd/rammtd.c. But an architecture-specific MTD driver can be used instead by defining CONFIG_TESTING_SMART_ARCHINIT. In this case, the initialization logic will call smart_archinitialize() to obtain the MTD driver instance.

• CONFIG_TESTING_SMART_NEBLOCKS – When CONFIG_TESTING_SMART_ARCHINIT is not defined, this test will use the RAM MTD device at drivers/mtd/rammtd.c to simulate FLASH. In this case, this value must be provided to give the number of erase blocks in MTD RAM device. The size of the allocated RAM drive will be: CONFIG_RAMMTD_ERASESIZE * CONFIG_TESTING_SMART_NEBLOCKS.

• CONFIG_TESTING_SMART_MAXNAME – Determines the maximum size of names used in the filesystem.

• CONFIG_TESTING_SMART_MAXFILE – Determines the maximum size of a file.

• CONFIG_TESTING_SMART_MAXIO – Max I/O, default 347.

• CONFIG_TESTING_SMART_MAXOPEN – Max open files.

• CONFIG_TESTING_SMART_MOUNTPT – SMART mountpoint.

• CONFIG_TESTING_SMART_NLOOPS – Number of test loops. default 100.

• CONFIG_TESTING_SMART_VERBOSE – Verbose output.