RH850/U2C

Tags: arch:rh850 chip:u2c vendor:renesas

RH850/U2C (R7F702600, G4KH core) is supported in a flat build with these features:

  • Runs in supervisor mode with the FPU enabled (-msoft-float builds with CONFIG_ARCH_FPU=n).

  • Interrupts are managed by INTC1 and INTC2 with the direct vector method and 16 priority levels. Interrupts of a higher priority nest; ISPR holds requests of equal and lower priority until the handler returns.

  • OSTM0 in free-run compare mode is the system timer through the oneshot lower half (arch_alarm), ticked or tickless.

  • RLIN311 in UART mode is the console, with receive and transmit interrupts.

  • CPU exceptions (EI and FE level) print the cause and the registers, then panic.

This port has been tested on QEMU only:

  • qemu-rh850-u2c: the QEMU rh850-u2c machine.

Peripheral Support

Peripheral

Support

Notes

INTC1/2

Yes

Priorities 0-15, nesting

OSTM0

Yes

System timer

RLIN3

Yes

RLIN311 UART console

Others

No

Supported Boards