WeAct Studio STM32G0B1

Tags: arch:arm chip:stm32g0 vendor:st

This page discusses issues unique to NuttX configurations for the WeAct STM32G0B1 board.

../../../../../_images/weact-stm32g0b1.png

Board information

The board features:

  • nRST reset button and BOOT0 ST BootROM entry button,

  • One user LED and one user push-button,

  • HSE 8 Mhz and LSE 32.768 kHz,

  • USB OTG FS with Type-C connector,

  • Serial Wire Debug header for use with an external SWD/JTAG adapter.

LEDs

The WeAct STM32G0B1 board has only one software controllable LED on PC6. This LED can be used by the board port when CONFIG_ARCH_LEDS option is enabled.

If enabled the LED is simply turned on when the board boots successfully, and is blinking on panic / assertion failed.

Buttons

The WeAct STM32G0B1 board has only one button on PC13.

Serial Console

The default console is on USART3:

UART/USART

PINS

TX

PB8

RX

PB9

Configurations

nsh

Configures the NuttShell (nsh) located at apps/examples/nsh. This configuration enables a serial console on UART3.