ST Nucleo C071RB
The Nucleo C071RB is a member of the Nucleo-64 board family.
USB not supported yet.
Serial Console
At default USART2 connected to “Virtual COM Port” is used as serial console.
Configurations
nsh
Configures the NuttShell (nsh) located at apps/examples/nsh. The Configuration enables the serial interfaces on USART2. Support for builtin applications is disabled.
jumbo
This configuration enables many Apache NuttX features. This is mostly to help provide additional code coverage in CI, but also allows for a users to see a wide range of features that are supported by the OS.
Enabled features:
NSH
ADC with DMA enabled using A0 and A1 pins
button with software debouncing enabled (no RC filter on the board)
analogscope
Configuration demonstrating ADC data stream using NxScope over UART connected to VCOM.
See adcscope NxScope ADC data stream for more details.
Device detection with nxscli client:
$ nxscli serial /dev/ttyACM0 pdevinfo
INFO:nxscli:enable (0, <class 'nxscli.plugins.devinfo.PluginDevinfo'>, {})
INFO:nxscli:connecting to nxs device...
INFO:nxscli:connected!
INFO:nxscli:started <nxscli.plugins.devinfo.PluginDevinfo object at 0x7f090d810830>
Device Summary
Channels: 6
Divider support: no
Ack support: no
Flags: 0x00
RX padding: 0
Stream
Connected: yes
Started: no
Overflow count: 0
Bitrate: 0.0 B/s
Channel State
Applied enabled: none
Buffered enabled: none
Channels
+----+-------+-------+-----+-------+----+-----+
| ID | Name | Type | Dim | Valid | En | Div |
+====+=======+=======+=====+=======+====+=====+
| 0 | chan0 | INT16 | 1 | yes | no | 0 |
| 1 | chan1 | INT16 | 1 | yes | no | 0 |
| 2 | chan2 | INT16 | 1 | yes | no | 0 |
| 3 | chan3 | INT16 | 1 | yes | no | 0 |
| 4 | chan4 | INT16 | 1 | yes | no | 0 |
| 5 | chan5 | INT16 | 1 | yes | no | 0 |
+----+-------+-------+-----+-------+----+-----+
closing...
INFO:nxscli:disconnecting from nxs device...
INFO:nxscli:disconnected!