Nordic Thingy:52
The Thingy:52 (PCA20020) is a prototyping platform build around the nRF52832 from Nordic.
Peripheral Support
Peripheral |
Support |
NOTES |
|---|---|---|
UART |
Yes |
|
Buttons |
No |
|
LEDs |
No |
|
NFC |
No |
|
IMU (MPU-9250) |
No |
|
Low power accelerometer (LIS2DH12) |
No |
|
Pressure and temperature (LPS22HB) |
No |
|
Humidity and temperature (HTS221) |
No |
|
Color sensor (BH1745NUC) |
No |
|
Gas sensor (CCS811) |
No |
|
Microphone (MP34DB02) |
No |
|
Speaker |
No |
|
Battery monitoring |
No |
Serial Console
Pin |
Signal |
Notes |
|---|---|---|
P0.02 |
UART TX |
P4 header |
P0.03 |
UART RX |
P4 header |
Configurations
Each configuration is maintained in a sub-directory and can be selected as follow:
tools/configure.sh thingy52:<subdir>
Where <subdir> is one of the following:
nsh
Basic NuttShell configuration (console enabled in UART0, exposed via P4 header, at 115200 bps).
Flash & Debug
Both flashing and debuing is possible only with an external debug proble.