PHY Device Drivers
These drivers use the PHYLIB framework.
Realtek RTL8201F and RTL8211F
CONFIG_NET_PHY_REALTEK_RTL8201F enables the Clause 22 MII/RMII driver;
CONFIG_NET_PHY_REALTEK_RTL8211F enables the RTL8211F-VD and RTL8211F/FDI
RGMII driver. Register them with rtl8201f_register() or
rtl8211f_register() from <nuttx/net/realtek_phy.h> before creating
PHY devices. Repeated registration is safe.
Set phydev->interface before phy_connect(). For RTL8201F, select
PHY_INTERFACE_RMII when the reference clock is supplied to the PHY,
or PHY_INTERFACE_RMII_PHY_CLK_OUT when the PHY supplies the clock.
The interface mode determines clock direction in both the MAC and PHY
drivers; no separate clock flag or driver-private configuration is needed.
The RTL8201F driver preserves RMII timing and oscillator settings.
RTL8211F programs both delay
bits according to PHY_INTERFACE_RGMII, RGMII_ID, RGMII_TXID or
RGMII_RXID (no internal delay, both, TX only or RX only). Both drivers
use generic Clause 22 capability discovery, auto-negotiation, negotiated
link-status resolution and power control. Register-page operations are
serialized by the PHYLIB paged-access helpers. These drivers use polling
and auto-negotiation; forced link modes and PHY interrupts are not
implemented.