README
======
Overview
--------
Initial port to ESP32C3-Devkit-RUST-1 board:
https://github.com/esp-rs/esp-rust-board
Testing
-------
$ ./tools/configure.sh esp32c3-devkit-rust-1:nsh
$ make
$ make flash ESPTOOL_PORT=/dev/ttyACM0
Alternatively you can compile and flash faster this way:
$ make -j flash ESPTOOL_PORT=/dev/ttyACM0
After flashing NuttX in this board use minicom or other serial console
configured to:
Device: /dev/ttyACM0
Baudrate: 9600 8n1
If everything is fine you should be able to get the serial console:
nsh> uname -a
NuttX 10.4.0 55df6e951e-dirty Aug 22 2022 17:12:29 risc-v esp32c3-devkit-rust-1
nsh> mount
/proc type procfs
nsh> free
total used free largest nused nfree
Umem: 377872 5792 372080 372080 30 1
nsh>