Microchip pic32mx

(MIPS M4K architecture)

Microchip PIC32MX2xx

A port is in progress from the DTX1-4000L “Mirtoo” module from Dimitech. This module uses Microchip PIC32MX250F128D and the Dimitech DTX1-4000L EV-kit1 V2. See the Dimitech website for further information.

Microchip PIC32MX4xx

PIC32MX440F512H. This port uses the “Advanced USB Storage Demo Board,” Model DB-DP11215, from Sure Electronics. This board features the Microchip PIC32MX440F512H.

PIC32MX460F512L. There one two board ports using this chip:

  • PIC32MX Board from PCB Logic Design Co. This port is for the PIC32MX board from PCB Logic Design Co. and used the PIC32MX460F512L. The board is a very simple – little more than a carrier for the PIC32 MCU plus voltage regulation, debug interface, and an OTG connector.

  • UBW32 Board from Sparkfun This is the port to the Sparkfun UBW32 board. This port uses the original v2.5 board which is based on the Microchip PIC32MX460F512L. This older version has been replaced with this newer board. See also the UBW32 web site.

Microchip PIC32MX7xx

PIC32MX795F512L. There one two board ports using this chip:

  • Microchip PIC32 Ethernet Starter Kit. This port uses the Microchip PIC32 Ethernet Starter Kit (DM320004) with the Expansion I/O board. See the Microchip website for further information.

  • Mikroelektronika PIC32MX7 Mulitmedia Board (MMB). A port has been completed for the Mikroelektronika PIC32MX7 Multimedia Board (MMB). See http://www.mikroe.com/ for further information about this board.

Development Environment: These ports uses either:

  1. The LITE version of the PIC32MX toolchain available for download from the Microchip website, or

  2. The Pinguino MIPS ELF toolchain available from the Pinguino website.

  3. The MIPS SDE toolchain available from the Mentor Graphics website.

Supported Boards