==========================
Quadrature Encoder Drivers
==========================

NuttX supports a low-level, two-part Quadrature Encoder driver.

#. An "upper half", generic driver that provides the common
   Quadrature Encoder interface to application level code, and
#. A "lower half", platform-specific driver that implements the
   low-level timer controls to implement the Quadrature Encoder
   functionality.

Files supporting the Quadrature Encoder can be found in the
following locations:

-  **Interface Definition**. The header file for the NuttX
   Quadrature Encoder driver reside at
   ``include/nuttx/sensors/qencoder.h``. This header file includes
   both the application level interface to the Quadrature Encoder
   driver as well as the interface between the "upper half" and
   "lower half" drivers. The Quadrature Encoder module uses a
   standard character driver framework.
-  **"Upper Half" Driver**. The generic, "upper half" Quadrature
   Encoder driver resides at ``drivers/sensors/qencoder.c``.
-  **"Lower Half" Drivers**. Platform-specific Quadrature Encoder
   drivers reside in
   ``arch/<architecture>/src/<hardware>`` directory
   for the specific processor ``<architecture>`` and for the
   specific ``<chip>`` Quadrature Encoder peripheral devices.

Application Programming Interface
=================================

The first thing to be done in order to use the quadrature encoder driver
from an application is to include the correct header filer. It contains the
Application Programming Interface to the driver. To do so, include

.. code-block:: c

  #include <nuttx/sensors/qencoder.h>

Quadrature encoder driver is registered as a POSIX character device file
into ``/dev`` namespace. It is necessary to open the device to get a file
descriptor for further operations. This can be done with standard POSIX
``open()`` call.

The driver is accessed only through ``ioctl`` interface, functions ``read``
and ``write`` does not have any affect. Following ``ioctl`` commands are
available:

 * :c:macro:`QEIOC_POSITION`
 * :c:macro:`QEIOC_RESET`
 * :c:macro:`QEIOC_SETPOSMAX`
 * :c:macro:`QEIOC_SETINDEX`
 * :c:macro:`QEIOC_GETINDEX`

.. c:macro:: QEIOC_POSITION

This call gets the current position from the encoder driver. Argument
of the call is a pointer to ``int32_t`` variable.

.. c:macro:: QEIOC_RESET

This command resets the current encoder positition to zero.

.. c:macro:: QEIOC_SETPOSMAX

The ``QEIOC_SETPOSMAX`` call sets the maximum position for the encoder.
An argument is an ``uint32_t`` variable with the maximum position value.

.. c:macro:: QEIOC_SETINDEX

This ioctl sets the index position of the encoder. An argument is an
``uint32_t`` variable with the maximum position value.

.. c:macro:: QEIOC_GETINDEX

This ioctl gets the index position of the encoder. An argument is a
pointer to ``qe_index_s`` structure.

.. c:struct:: qe_index_s
.. code-block:: c

   struct qe_index_s
   {
      /* Qencoder actual position */
      int32_t qenc_pos;
      /* Index last position */
      int32_t indx_pos;
      /* Number of index occurances */
      int16_t indx_cnt;
   };

The pointer to this structure is used as an argument to ``QEIOC_GETINDEX``
ioctl command. It gets the current encoder position, the last position of
index and the number of index occurances.

Application Example
~~~~~~~~~~~~~~~~~~~

An example application can be found in ``nuttx-apps`` repository under
path ``examples/qencoder``. It demonstrates the basic data read
from an encoder device.

.. code-block:: console

    nsh> qe
    1.  0
    2.  0
    3.  0
    4.  1
    5.  1
    6.  1
    7.  2
    8.  2
    9.  3

Configuration
=============

This section describes qencoder driver configuration in ``Kconfig``. The
reader should refer to target documentation for target specific configuration.

The ``CONFIG_SENSORS`` option has to be enabled in order to use the qencoder
peripheral. The peripheral itself is enabled by ``CONFIG_SENSORS_QENCODER``
option.