KIT_A2G_TC397_TFT

This page file describes the contents of the build configurations available for the NuttX TriCore port.

Infineon’s AURIX™- TC3xx KIT_A2G_TC397_TFT Board

This port should work on KIT_A2G_TC397_TFT with a proper CPU. The mandatory CPU features are:

  • System Timer (STM)

  • Asynchronous Serial Interface(ASCLIN) UART

  • IRQs are managed by Interrupt Router(INT), IR Service Request Control Registers(SRC).

Toolchains

Currently, only the Infineon’s AURIX™ Tasking toolchain is tested.

Configurations

Common Configuration Notes

  1. Each Tricore TC397 configuration is maintained in a sub-directory and can be selected as follow:

    tools/configure.sh tc397:<subdir>

    Where <subdir> is one of the configuration sub-directories described in the following paragraph.

    NuttX Shell:

    tools/configure.sh tc397:nsh

  2. These configurations use the mconf-based configuration tool. To change a configurations using that tool, you should:

    1. Build and install the kconfig-mconf tool. See nuttx/README.txt see additional README.txt files in the NuttX tools repository.

    2. Execute make menuconfig in nuttx/ in order to start the reconfiguration process.

  3. By default, all configurations assume the Linux. This is easily reconfigured:

    CONFIG_HOST_LINUX=y

Configuration Sub-Directories

ostest

The “standard” NuttX examples/ostest configuration.