PolarFire Icicle Kit

../../../../../_images/icicle.png

CPU

PolarFire SoC FPGA (MPFS250T-FCVG484EES)

  • SiFive E51 Monitor core (1 x RV64IMAC)

  • SiFive U54 Application cores (4 x RV64GC)

  • and Secure boot

Memory and storage

  • 2 GB LPDDR4 x 32

  • 1 Gb SPI flash

  • 8 GB eMMC flash & SD card slot (multiplexed)

Programming & Debugging

Onboard JTAG connector or onboard embedded FlashPro (multiplexed)

  • UART via micro USB

  • 52 x test points

Interfaces

  • 4 x 12.7 Gbps SERDES

  • PCIe Gen2 Rootport

  • 2 x Gigabit Ethernet

  • Micro USB 2.0 Hi-Speed OTG

  • 4 x UART (via single micro USB)

  • 2 x CAN

  • 2 x SPI

  • 2 x I²C

Expansion

  • Raspberry Pi compatible 40-pin header

  • mikroBUS socket

Sensor

  • Power sensor (pac1934)

Buttons and LEDs

Buttons

There are 3 buttons and reset button. The Reset button is not available to software by default.

LEDs

There is 4 user controlled on-board LEDs.

Configurations

nsh

Basic configuration to run the NuttShell (nsh).